Shanghai Power Cable&Wire Co.,LTD.

Nominal cross-section /mm²	AWG	Conductor construction /mm		Max.OD of cable /mm		Structure core D.C. Resistance is not than Ω/km when it is 20℃
Nominal cross-section /mm²	AWG	Construction pcs	Outer Diameter	AF	AFP	Silvered	Tinned
0.035	32	7/0.08	0.24	0.84	1.24	550	562
0.050		10/0.08	0.30	0.90	1.30	370	383
0.060	30	1/0.26 7/0.10	0.30	0.90	1.30	339	348
0.080	28	1/0.32 7/0.12	0.36	0.96	1.36	280	286
0.100	27	7/0.14 21/0.08	0.42	1.02	1.42	150	157
0.120	26	1/0.40 7/0.15	0.45	1.05	1.45	145	152
0.140		7/0.16 19/0.10	0.48	1.08	1.58	130	136
0.150	25	30/0.08	0.50	1.10	1.60	105	111
0.200	24	1/0.52 7/0.20 19/0.12	0.60	1.20	1.70	82	87
0.350	22	19/0.16	0.80	1.40	1.90	54	57
0.500	20	1/0.82 19/0.20 19/0.185	0.90	1.50	2.00	37.5	40
0.800	18	19/0.23	1.15	1.80	2.30	23	24
1.00	17	19/0.26	1.30	2.00	2.50	20	21
1.20	16	19/0.28	1.40	2.30	3.05	18	19
1.50	15	19/0.32	1.60	2.50	3.25	12	13
2.00	14	19/0.37	1.85	2.70	3.45	9	10
2.50	13	37/0.30 19/0.41	2.10	3.20	3.95	7	8
3.00	12	37/0.32	2.24	3.60	4.35	6.4	6.8
4.00		37/0.37 49/0.32	2.59	3.95	4.45	20	4.5
5.00	10	37/0.41	2.80	4.20	4.70	18	3.9
6.00		37/0.45	3.15	4.50	5.00	20	3.05
8.00	8	133/0.29	4.30	5.70	6.20	18	2.16

1. Structure Chart

1). tinned or silvered copper conductor
2). FEP or ETFE Insulation
3). tinned or silvered copper wire braid shielding

2. basic mechanical design feature:
1). Much better anti-corrosion nature, practically insoluble any organic solvents, good resistance to oil, strong acid and alkali. resistance to high pressure and high frequency, nonhygroscopic, high insulation electrical resistance. With better uninflammability, aging-resistance and long service life.
2). rated voltage: 600V. Test voltage: 2500V. insulation resistance: not less than 106MΩ·km
3). If delivered length not is less than 8m, short interval deliver is allowable, but the number of h short interval deliver cannot exceed 20% of the total number.